Qm_Idle Active

Qm_Idle Active



12/3/2008  · QM_IDLE state means to me this tunnel is UP and the IKE SA key exchange was successfull, but is idle, it remains authenticated in a (Q M) quiescent state but active. Have a look at this two links to learn all about Ipsec and those commands. http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a0080094203.shtml, 11/17/2020  · AS1-7304A#show crypto isakmp sa dst src state conn-id slot 200.1.1.10 200.1.1.9 QM_IDLE 2 0 200.1.1.1 200.1.1.2 QM_IDLE 1 0 After we can verify that Phase 1 SAs are established (by examining the output listed in Example 3-4), we are then ready to verify the establishment of IPsec SAs.


4/30/2012  · QM_IDLE *** – The ISAKMP SA is idle and authenticated Here are a few more commands we can issue to get a quick glimpse of the status of any IPSec VPN’s. sh crypto ipsec sa – Now this output can really daunting at first just due to the amount of information that is displayed here but there are a few key things to watch out for.


7/10/2012  · Hi guys, My router is Cisco 2811 with IOS version 12.4(22)T1. It had established IPSec with another peer (203.*.*.250 shown below) for long until recently we make it re-establish IPSec VPN with another peer (203.*.*.30 shown below). It showed that the new sa is active but the result still showed th…


R5#show crypto isakmp sa IPv4 Crypto ISAKMP SA dst src state conn-id status 172.16.1.5 172.16.1.2 QM_IDLE 1001 ACTIVE R5#show crypto ipsec sa, The ISAKMP SA has been authenticated. If the router initiated this exchange, this state transitions immediately to QM_IDLE and a Quick mode exchange begins. QM_IDLE The ISAKMP negotiations are complete. Phase 1 successfully completed. It remains authenticated with its peer and may be used for subsequent Quick mode exchanges.


10/8/2015  · R1(config)#do show crypto isa sa dst src state conn-id slot status 199.88.212.2 70.54.241.2 QM_IDLE 1 0 ACTIVE To verify IPSec Phase 2 connection, type show crypto ipsec sa as shown below.


Mar 26 15:53:55.101 GMT: ISAKMP:(1095):deleting SA reason No reason state (R) QM_IDLE (peer 65.25.19.60) Mar 26 15:53:55.101 GMT: ISAKMP: Unlocking peer struct 0x15EBD7D8 for isadb_mark_sa_deleted(), count 1 . Mar 26 15:53:55.101 GMT: ISAKMP:(1095):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH, 10/8/2015  · R1#show crypto isakmp sa dst src state conn-id slot status 70.54.241.2 199.88.212.2 QM_IDLE 1 0 ACTIVE To verify IPSec Phase 2 connection, type show crypto ipsec sa as shown below.

Advertiser